Pipeline Frost Protection System
A pipeline frost protection system keeps a line working through the winter by running a heating cable along the outside of the pip

A cold store floor heating mat is an electrical floor protection system laid beneath concrete that prevents the ground under the floor of a store running at −30 °C to −40 °C from freezing…
سعر استرشادي تسليم المصنع إسطنبول، غير شامل الضريبة والشحن والرسوم. محوّل من سعر القائمة بالليرة التركية وفق السعر المبيّن، ويُعتمد نهائياً في عرض السعر.
سعر الصرف بتاريخ: 2026-09-15
A cold store floor heating mat is an electrical floor protection system laid beneath concrete that prevents the ground under the floor of a store running at −30 °C to −40 °C from freezing and that freezing from lifting the slab. TMax cable is used as the heater; the mat is that cable arranged at the correct spacing on a carrier at the factory. An average of 4 metres of cable goes into each 1 m², and an Ekoline control unit is included with the system. The mat is made 50 cm or 100 cm wide, with the length specific to the project; at least 5 cm of fine, aggregate-free concrete or screed is poured over it.
The EasyMat mat is TMax heating cable arranged at the correct spacing on a carrier at the factory. The cable itself does not change — what changes is how it arrives on site. In free cable form you set the laying spacing on site; on the mat that spacing is fixed at the factory. This is where the real value of the cold store floor heating mat lies: the roll is unrolled and laid side by side, the laying time is markedly shorter and the margin for error on site is lower.
Mat 50 cm wide 50 cm wide, with the length specific to the project. It turns more easily in narrow corridors and small compartments; this width is also used to cover the narrow strips at the edge of an area.
Mat 100 cm wide 100 cm wide, with the length specific to the project. It covers the same area with fewer rolls, so it leaves fewer joints and the laying finishes faster.
| Property | Value |
|---|---|
| Product and use | Cold store floor heating mat beneath concrete · TMax heating cable in EasyMat mat formthe outdoor floors of cold stores, ice houses and ice skating rinks |
| Cable length required | an average of 4 metres of cable per 1 m²in a redundant system, an average of 8 metres per 1 m² in two independent runs |
| Mat dimensions | Width 50 cm or 100 cm · length specific to the projectthe carrier may be cut at turns; the cable may not |
| Concrete to be poured over it | At least 5 cm of fine, aggregate-free concrete or screedconcrete containing crushed stone is not used |
| Operating environment | Beneath the floor of cold stores running at −30 °C to −40 °Cits purpose is not to heat the store but to hold the ground beneath the floor above freezing point |
| Control | Ekoline control unit · digital temperature display · adjustable set temperature, recommended +2 °C · automatic switching on and off · low and high temperature alarmit is possible to move up to the Proline and Maxline steps |
| Sensor | Floor temperature sensor with a 3 metre lead · placed between two runs in installation conduitone per panel |
| Electrical protection | Fed through a 30 mA residual current devicethe relay, the supply line and the electrical labour are not included in the price |
| Consumables charge | 15 per centcarrier material and factory mat production labour |
| Manufacture and warranty | Our own manufacture since 1995 · 10-year warranty on the mat · 2-year warranty on the control unit, thermostat and sensor |
| Aspect | EasyMat matting | TMax cable |
|---|---|---|
| How it arrives on site | The cable arranged on a carrier at the factory, in a roll | Cable at the calculated length, with its fixing strip |
| Laying spacing | Fixed at the factory; cannot be changed on site | Set on site; can be tightened around obstacles |
| Suitable geometry | Regular, wide floors close to a rectangle | Irregularly shaped, narrow or angular floors |
| Laying time | The roll is unrolled; markedly short | You work run by run; it takes longer |
| Consumables charge | 15 per cent — carrier material and factory assembly labour | None; it comes with its fixing strip |
| Cable per 1 m² | An average of 4 metres | An average of 4 metres |
Installing a cold store floor heating mat runs hand in hand with the floor construction, and there is no going back once the concrete is poured. Your own team can do the laying; the connection to the panel and the supply line must be left to a qualified electrician.
The warranty on a cold store floor heating mat splits into two items: the heating element that stays beneath the concrete, and the control equipment in an accessible position. With the floor heating experience we have carried on since 1995, you can use ISITMAX products with confidence. For project calculations, dimension checks and questions during installation you can reach us on WhatsApp and at info@isitmax.com.
A pipeline frost protection system keeps a line working through the winter by running a heating cable along the outside of the pip
Industrial tank heat tracing is a heating cable system wrapped around the body of storage and process tanks: it prevents the liqui
A silicone-insulated pipe heating cable (heat trace) is a heating cable wrapped around or run along the surface of pipe and tank l
HMax is a self-regulating heating cable made to prevent pipelines freezing.
صف لنا التطبيق وسنقوم بتحديد مقاس النظام وتسعيره.