ISITMAX
Rohr- und Tankbegleitheizung
Pipeline Frost Protection System
A pipeline frost protection system keeps a line working through the winter by running a heating cable along the outside of the pip
ab €10 $10Produkt ansehen →
Rohr- und Tankbegleitheizung
Cold Store Floor Heating Cable
A cold store floor heating cable is an electrical system that holds the ground beneath the store's concrete slab above freezing point.
Richtpreis · ab
€490 / $570
Richtpreis ab Werk Istanbul, zzgl. MwSt., Fracht und Zoll. Umgerechnet vom TRY-Listenpreis zum angegebenen Kurs; verbindlich erst im Angebot.
Kurs vom: 2026-09-15
Verfügbare Größen
Überblick
A cold store floor heating cable is an electrical system that holds the ground beneath the store's concrete slab above freezing point. The aim is not to heat the inside of the store — it is to stop the ground beneath a space running at sub-zero temperatures from freezing, expanding and lifting the slab from below. The heater used is TMax cable of constant 17 W/m: an average of 4 metres of cable is laid per 1 m², and the system comes together with an Ekoline control unit. The cable form lets you adjust the laying spacing on site in stores whose floor area is narrow, angular or irregular.
A cold store floor heating cable is an electric heating element buried beneath the store's slab that holds the ground above freezing point. ISITMAX manufactures TMax cable of constant 17 W/m for this job; the cable is prepared at the length calculated for the site, comes together with its fixing strip and is laid before the concrete is poured.
Auf einen Blick
4 metres of TMax cable per 1 m²The cable length required follows directly from your store area; the constant 17 W/m cable is laid at roughly 25 cm spacing.
Buried beneath the concrete, an invisible systemThe cable is fixed onto the insulation or to the reinforcement mesh, with at least 5 cm of screed over it; no trace is left on the floor.
Ekoline control unit includedThe floor sensor reads the temperature and the system switches itself on and off at the recommended +2 °C setting.
10-year warranty on the cable2 years on the control panel, thermostat and sensor. Our own manufacture, carried on since 1995.
Einsatzbereiche
TMax cable
The right choice on irregular, narrow and angular floors
The cable comes at the calculated length together with its fixing strip; you set the spacing on site. It is the only answer when you need to work around obstacles such as column bases, machine plinths, manhole covers and rack anchors, or to tighten the spacing in critical areas such as doorways. It is also the most flexible form for applications over reinforcement mesh.
EasyMat matting
Shortens the laying work on regular, wide floors
The cable is arranged at the correct spacing at the factory on a carrier 50 cm or 100 cm wide. The roll is unrolled and laid side by side, and at turns only the carrier is cut. Because the laying spacing is fixed at the factory, the margin for error on site is low. A consumables charge also applies to the mat form.
Technische Daten
| Property | Value |
|---|---|
| Product and use | Cold store floor heating cable · floor frost protection system beneath concrete · cold stores, ice houses and ice rinksit is for floor protection, not for comfort heating |
| Heater | TMax constant-wattage heating cable · 17 W/mthe same cable is also used in EasyMat mat form |
| Cable length required and laying spacing | an average of 4 metres of cable per 1 m² · roughly 25 cm laying spacingin a redundant system, 8 metres per 1 m² in two independent runs |
| Store operating temperature | Used at internal store temperatures down to −40 °C |
| Floor set temperature | Adjustable · recommended value +2 °C |
| Installation position | Fixed onto the thermal insulation board or to the reinforcement mesh · at least 5 cm of screed or floor mortar over itthe runs must not cross, overlap or be brought close to one another |
| Control | Ekoline control unit · digital display · adjustable set temperature · automatic switching on and off · low and high temperature alarm · 16 A contactor outputthe control unit is included in the price |
| Sensor | Floor temperature sensor with a 3 metre lead · inside installation conduit, midway between two heating runsbecause it is inside conduit, it can be replaced without breaking up the concrete |
| Electrical protection | Fed through a 30 mA residual current devicethe relay, the supply line and the electrical labour are not included in the price |
| Maintenance | The cable beneath the concrete has no moving parts · an annual check of the control unit is recommended |
| Manufacture and warranty | Our own manufacture, carried on since 1995 · 10 years on the cable · 2 years on the control unit, thermostat and sensor |
Auswahlhilfe
How many metres of cable are needed for a cold store floor heating cable?
| Store floor (net) | Standard single-run cable | Redundant system cable |
|---|---|---|
| 25 m² | 100 metres | 200 metres |
| 50 m² | 200 metres | 400 metres |
| 100 m² | 400 metres | 800 metres |
| 250 m² | 1,000 metres | 2,000 metres |
Ist dies das richtige Produkt?
Passend, wenn
- You are building or renewing a cold store, ice house or ice rink and want to prevent the ground beneath the floor from freezing and damaging the foundation.
- The floor is being newly poured — the cable is fixed onto the insulation or to the reinforcement mesh, with at least 5 cm of screed over it.
- Your floor is irregularly shaped, narrow or angular and you want to be able to adjust the laying spacing on site.
- You plan to fix the cable onto the reinforcement mesh; the free form suits you better than mat.
- You operate a critical store (pharmaceuticals, vaccines, high-value food) and are considering the redundant system option.
Nicht geeignet, wenn
- If your floor is a regular rectangle and you want a quick installation — the Cold Store Floor Heating Mat, the mat form of the same cable, shortens the laying time markedly.
- If you do not want to break up the existing concrete — this is a system that goes beneath the floor; it cannot be added to the surface afterwards.
- If the sprinkler line inside the store is freezing — Fire Sprinkler Line Frost Protection is a separate system mounted on the pipe.
- If you are melting snow and ice outdoors — store floor protection works for frost protection and does not melt snow; for ramps and courtyards, Snow and Ice Melting Under Concrete is the right product.
- If you are heating an enclosed space for comfort — this system is designed to hold the floor above freezing point; it does not heat the space.
Installation
Installing a cold store floor heating cable runs hand in hand with the concrete pour and there is no going back — once the pour is finished, reaching the cable means breaking up the concrete. Your own team can do the laying; the connection to the control unit and the supply line must be left to a qualified electrician.
Do not skip the resistance measurement before the concrete is poured. If a cable crushed during laying or a faulty splice ends up under the concrete, the only remedy is to break up the slab. During the pour, do not let the vibrator head touch the cable directly.
Bestellung und Lieferung
- You place your order by giving your store area and whether you want a single run or a redundant system
- The sketch arrives; the net area to be heated, the obstacles and the distance between the panel and the store are confirmed
- The cable length and power calculation is worked out, the cable is prepared at that length and the cold leads are brought out along the panel route
- The cable, fixing strip, Ekoline control unit and sensor are handed to the carrier together
- Technical support is provided at the laying, resistance measurement and commissioning stages
Garantie und Support
With the knowledge and experience in floor heating systems we have built up since 1995, we design and manufacture ourselves the floor heating systems best suited to cold stores. For project calculations, dimension checks and questions during installation you can reach us on WhatsApp and at info@isitmax.com.
Häufige Fragen
What is the difference between the standard and the redundant system?
The standard system uses 4 metres of cable per 1 m² and a single Ekoline control unit. The redundant system uses 8 metres of cable per 1 m² — that is, two independent circuits and two Ekoline units. The redundant system keeps the protection running even if the main system fails.
At what spacing should the cables be laid?
The standard application uses 4 metres of cable per 1 m². This means laying at roughly 25 cm spacing. The values in the installation manual must be observed; the runs must not overlap or be brought close to one another.
How many metres of cable per square metre are needed, and how do I calculate the length?
Multiply the net area to be heated by four: an average of 4 metres of TMax cable goes into 1 m². A net 60 m² floor needs 240 metres, or 480 metres in a redundant system. The net area is not the gross area — fixed rack plinths, column bases and the edge strip are not counted.
What should the minimum concrete thickness be?
At least 5 cm of screed or floor mortar must be poured over the cables. This thickness protects the cables from mechanical damage and lets the heat spread evenly.
Why choose cable rather than the mat system?
The cable system is ideal for irregularly shaped areas and for applications over reinforcement mesh. You set the laying spacing on site and can work around obstacles. The mat system, on the other hand, is chosen on regular rectangular areas because it shortens the laying time. The heater in both is the same TMax cable.
Ähnliche Produkte
Rohr- und Tankbegleitheizung
Industrial Tank Heat Tracing
Industrial tank heat tracing is a heating cable system wrapped around the body of storage and process tanks: it prevents the liqui
ab €1 280 $1 480Produkt ansehen →
Rohr- und Tankbegleitheizung
Silicone-Insulated Pipe Heating Cable
A silicone-insulated pipe heating cable (heat trace) is a heating cable wrapped around or run along the surface of pipe and tank l
ab €10 $15Produkt ansehen →
Rohr- und Tankbegleitheizung
HMax Series Self-Regulating Heat Trace Cable
HMax is a self-regulating heating cable made to prevent pipelines freezing.
ab €45 $50Produkt ansehen →
Angebot anfordern
Beschreiben Sie die Anwendung — wir legen das System aus und erstellen ein Angebot.