ISITMAX
Rohr- und Tankbegleitheizung
Pipeline Frost Protection System
A pipeline frost protection system keeps a line working through the winter by running a heating cable along the outside of the pip
ab €10 $10Produkt ansehen →
Rohr- und Tankbegleitheizung
SMax Series Constant-Wattage Pipe Heating Cable
SMax is a constant-wattage pipe heating cable made to prevent pipelines from freezing and to hold the liquid at its working temperature.
Richtpreis · ab
€375 / $435
Richtpreis ab Werk Istanbul, zzgl. MwSt., Fracht und Zoll. Umgerechnet vom TRY-Listenpreis zum angegebenen Kurs; verbindlich erst im Angebot.
Kurs vom: 2026-09-15
Verfügbare Größen
- 5m
- 6m
- 7m
- 8m
- 9m
- 10m
- 15m
- 20m
- 25m
- 30m
- 40m
- 50m
Überblick
SMax is a constant-wattage pipe heating cable made to prevent pipelines from freezing and to hold the liquid at its working temperature. Its difference from self-regulating cables is this: SMax delivers the same wattage to every metre of the run and does not change its output with the ambient temperature. It is therefore the choice on projects where the specification calls for a particular W/m figure, and on long straight runs. It is made in 20, 30, 40 and 50 W/m power options, all four at the same price. A control panel is mandatory — because the cable does not throttle itself, the panel manages the temperature.
SMax is a constant-wattage pipe heating cable of parallel construction. Two supply conductors run side by side along the cable; resistance sections connected between them at set intervals produce the heat. Because each section delivers the same power on its own, the wattage does not change along the run — the first metre of the cable and the thirtieth produce the same heat.
Auf einen Blick
Constant wattageEqual heat at every metre; if the specification calls for a W/m figure, this is the cable.
20 / 30 / 40 / 50 W/mAll four powers are the same price; the pipe determines the choice.
Fault isolationParallel construction — apart from the damaged section, the run keeps working.
2-year warrantyCE-certified ISITMAX manufacture.
Einsatzbereiche
Constant wattage — SMax
Equal wattage along the run
The project calculation becomes simple: total power = metres × W/m. If the specification calls for a particular W/m figure, this cable delivers that figure directly and it can be documented.
Self-regulating — HMax
Every point adjusts its own output
The output varies with the ambient temperature and the cable may be overlapped. It is the choice on irregular runs with a high density of valves and flanges.
Technische Daten
| Property | Value |
|---|---|
| Type | Parallel, constant wattage |
| Output | 20 · 30 · 40 · 50 W/mall four at the same price |
| Conductor cross-section | 2×0,75 mm² · 2×1,5 mm² · 2×2,5 mm² |
| Supply voltage | 230 V standard115 V and 400 V optional |
| Insulation | Silicone insulation, PVC outer sheath, twin-conductor |
| Behaviour in a fault | Only the damaged section stops heating; the run keeps working |
| Cutting on site | Yes — cut to any length required |
| Overlapping | None |
| Fastening | Integrated cold lead |
| Control | Control panel mandatory |
| Maximum run per circuit | 50–60 mabove this, the circuit is split into several runs |
| Explosion protection | None |
| Conformity | CE-certified manufacture |
| Warranty | 2-year manufacturer warranty |
Auswahlhilfe
Which power rating should I choose?
| Pipe | Diameter | Recommended output |
|---|---|---|
| Plastic (PVC, PPRC, PE) | Up to Ø50 mm | 20 W/mthis figure must not be exceeded |
| Metal | Up to Ø50 mm | 20–30 W/m |
| Metal | Ø50–100 mm | 30–40 W/m |
| Metal | Ø100 mm and above | 40–50 W/m or a twin run |
Ist dies das richtige Produkt?
Passend, wenn
- Your project specification calls for a fixed W/m figure; equal heat output is required at every metre along the run.
- Your run is long and straight; the density of valves, flanges and pumps is low and the cable will not overlap itself.
- High power in the 20–50 W/m range is required; on metal pipe above Ø100 mm, constant-wattage pipe heating cable delivers the required wattage directly.
- You are able to operate the run with a control panel and a temperature sensor.
- The fault isolation feature of the parallel construction is useful to you: apart from the damaged section, the run keeps working.
Nicht geeignet, wenn
- If the geometry will make the cable overlap itself — on runs with a high density of valves, flanges and elbows, constant-wattage cable overheats at that point. HMax self-regulating heating cable is used for that job.
- If you do not want to install a panel — without a thermostat, SMax runs continuously. At the scale of a single domestic pipe, a garden tap or a meter box, installing a panel and a circuit is unnecessary anyway; HMax, whose thermostat is optional, is used for those jobs.
- The surface to be heated is not a pipe but a tank or silo body — industrial tank heat tracing is sized by surface area.
- You want to heat a valve or a short pipe section with a removable solution — heated flange and valve jackets and heated pipe jackets are the alternative to cable.
- A hazardous area (Ex) classification is required — this cable is not explosion protected.
Installation
- lengthCut the cable to the calculated length; do not forget the allowances for valves, pumps and elbows
- layingLay it as a straight run along the pipe; do not overlap the cable
- fixingFix it in place — aluminium tape on plastic pipe, glass fibre tape on metal pipe
- sensorPlace the sensor on the pipe surface, on the opposite side from the cable
- testingMeasure and record the insulation resistance
- insulationCover the pipe and cable with rock wool or glass wool and wrap foil over it
- commissioningConnect the cold lead to the junction box and the panel, then set the thresholds and test
A system without insulation does not work efficiently. The insulation keeps the heat that is produced in the pipe; on an uninsulated run the cable works continuously, consumption rises and the protection is still not complete. The cable goes beneath the insulation. Fix the sensor on the opposite side of the pipe from the cable as well, so that it sees the temperature of the pipe and not of the cable — a sensor placed next to it shuts the system down too early.
Bestellung und Lieferung
- same dayLength and rating confirmed, order placed
- 1 working dayCutting, testing and packing
- 1 working dayHandover to the carrier and tracking number
- 1–3 working daysDelivery throughout Türkiye
Garantie und Support
ISITMAX has manufactured electric heating products in its own facility since 1995; the manufacture is CE-certified. The concept of electrical resistance is a good starting point for classifying heating cables in general: in constant-wattage cables the heat is released across sections of fixed resistance.
Häufige Fragen
What is the difference between constant-wattage pipe heating cable and self-regulating cable?
SMax delivers the same wattage to every metre of the run and does not change its output; it is the choice on projects where the specification calls for a particular W/m figure and on long straight runs. HMax adjusts its own output at every point according to the ambient temperature and may be overlapped; it is used on irregular runs with a high density of valves and flanges.
Is a control panel really mandatory?
Yes. Constant-wattage pipe heating cable produces the same heat for as long as it is energised; with no panel to stop the system, the pipe rises far above the target temperature. The panel switches the cable on and off according to the value it reads from the sensor on the pipe surface. Residual current protection and correct earthing are mandatory as well.
Which wattage should I choose?
20 W/m on plastic pipe — this figure must not be exceeded. On metal pipe, according to diameter: 20–30 W/m up to Ø50 mm, 30–40 W/m for Ø50–100 mm, and 40–50 W/m or a twin run above Ø100 mm. All four powers are the same price.
Can constant-wattage pipe heating cable be cut on site?
Yes, it is cut to the required length and connected with an integral cold lead. The cut point is sealed with a splice and termination kit. The cable must not, however, be overlapped — it overheats where it crosses itself.
What does fault isolation mean?
SMax is of parallel construction: if the cable is damaged at a point, only the section between the two contact points either side of the damage stops heating, and the rest of the run keeps working. In series-connected cables a single break puts the whole run out of service.
Ähnliche Produkte
Rohr- und Tankbegleitheizung
Industrial Tank Heat Tracing
Industrial tank heat tracing is a heating cable system wrapped around the body of storage and process tanks: it prevents the liqui
ab €1 280 $1 480Produkt ansehen →
Rohr- und Tankbegleitheizung
Silicone-Insulated Pipe Heating Cable
A silicone-insulated pipe heating cable (heat trace) is a heating cable wrapped around or run along the surface of pipe and tank l
ab €10 $15Produkt ansehen →
Rohr- und Tankbegleitheizung
HMax Series Self-Regulating Heat Trace Cable
HMax is a self-regulating heating cable made to prevent pipelines freezing.
ab €45 $50Produkt ansehen →
Angebot anfordern
Beschreiben Sie die Anwendung — wir legen das System aus und erstellen ein Angebot.