السخانات المرنة والأغطية الحرارية

Drum Heating Oven

Name: Drum Heating Oven
Brand: ISITMAX
SKU: ISX-VARIL-ISITMA-FIRINI
Availability: InStock

The drum heating oven brings the raw material in drums and IBC tanks to the right viscosity before manufacture by heating it at a controlled temperature.

رقم الصنف: ISX-VARIL-ISITMA-FIRINI الفئة: السخانات المرنة والأغطية الحرارية

سعر استرشادي · ابتداءً من

€8 335 / $9 625

سعر استرشادي تسليم المصنع إسطنبول، غير شامل الضريبة والشحن والرسوم. محوّل من سعر القائمة بالليرة التركية وفق السعر المبيّن، ويُعتمد نهائياً في عرض السعر.
سعر الصرف بتاريخ: 2026-09-15

المقاسات المتاحة

Electric
Steam / Thermal oil

المقاسات المتاحة

1 drum
2 drums
4 drums (1 IBC tank)
8 drums (2 IBC tanks)
8 drums on two levels (2 IBC tanks)
12 drums (3 IBC tanks)
16 drums (4 IBC tanks)
24 drums (6 IBC tanks)

اطلب عرض سعر واتساب

نظرة عامة

The drum heating oven brings the raw material in drums and IBC tanks to the right viscosity before manufacture by heating it at a controlled temperature. The whole item of equipment is taken inside the oven: the heat is spread evenly over every surface by fan-assisted circulation, the temperature is held steady digitally, and the result repeats on every cycle.

The price does not rise in direct proportion to capacity — the body, the control system and the fan group are supplied once in every model.

لمحة سريعة

CE certifiedOur own manufacture since 1995

2-year warrantyElectrical and mechanical components included

Delivered assembledPut it in place, connect it, run it

Delivery throughout TürkiyeMaintenance and spare parts support

أين يُستخدم

Electric

Heats with its own element

It requires only electricity from the plant. The right choice for businesses with no steam boiler or thermal oil line, and for ovens to be sited away from the line. It is the simplest solution to install.

Steam / Thermal oil

Fed from your existing line

It takes heat from the steam boiler or thermal oil line already running in your plant. It adds no extra electrical load and lowers the operating cost markedly. If you have the line, it is more economical.

Industry	Typical application
Chemicals	Heating resin, polymer, adhesive and solvent
Paint and coatings	Viscosity adjustment in varnish and paint
Petrochemicals	Heating bitumen, paraffin wax and mineral oil
Food	Melting honey, sugar syrup, oils and fats, and chocolate
Pharmaceuticals and cosmetics	Raw material preparation, cream and lotion production
Plastics and polymers	Melting raw material and preparation before dosing
Laboratory and R&D	Sample preparation and pilot production cycles

المواصفات الفنية

Property	Standard	Optional
Temperature range	Electric: ambient temperature – 150 °CSteam / thermal oil: ambient temperature – 180 °C	Range specific to the project
Temperature control	Digital proportional controller	PLC + HMI touch screen
Heat distribution	Fan-assisted circulation	High-capacity fan
Electrical connection	240 V or 380 V, 3-phaseOn the steam version, only for the fan and controls	—
Construction	1.2 mm inner · 1.4 mm outer wall, steel frame	304 stainless steel
Insulation	76 mm mineral wool, 6# density	100 mm high efficiency
Surface	Stove-enamelled inner and outer surfaces	Stainless steel lining
Handling	Body that can be moved by forklift	On castors · flush with the floor
Spill containment tray	Integrated into the body, 53 – 625 L (according to capacity)	—
Safety	Overheat cut-out, door sensor, emergency stop, residual current protection, temperature alarm	Gas detector · fire suppression
Food compliance	—	FDA / EC 1935/2004 inner surface
Data logging	—	USB / Ethernet logger · SCADA
Conformity	CE	—

دليل الاختيار

Jacket, cabinet or oven?

Solution	When it is right	Its limit
Heating jacket	One or two drums, the 60–70 °C band, an economical solution	A separate jacket and separate labour are needed for each drum
Base heating unit	If drums are changed frequently by forklift and maintaining fluidity is enough	It heats only from the base; not enough for complete melting
Drum heating cabinet	If you need a single drum but with full control and high temperature	Single-drum capacity
Drum heating oven	Four drums or more at a time, a repeatable cycle, above 70 °C	It requires a fixed installation and a supply line

هل هذا المنتج مناسب لك؟

مناسب عندما

If you are melting raw material in 4 drums or more at a time
If you need to take the raw material above 70 °C
If you want a repeatable result on every cycle

غير مناسب عندما

If you work with one or two drums — a heating jacket is more economical
If you only need to prevent freezing — a base heater is enough
It is not used for heating flammable substances directly

التركيب

The drum heating oven is assembled and tested at our factory before dispatch. The work to be done on site is putting the body in position and making the supply connection.

الطلب والتسليم

1–2 daysQuotation and needs analysis
1 dayOrder confirmation and production planning
20–30 daysProduction
2 daysTesting and quality control
2–5 daysDispatch — throughout Türkiye, fully assembled
1 dayInstallation, commissioning, training

الأسئلة الشائعة

Why should I buy an oven rather than a jacket?

A jacket is right for businesses working with one or two items of equipment and melting in the 60–70 °C band. In a plant processing five, ten or twenty drums at a time, working with jackets costs labour and time. Where the temperature has to go above 70 °C, a jacket cannot be used.

Which is more economical, steam or electric?

If there is a steam boiler or thermal oil line running in the plant, the steam model lowers the operating cost markedly. If there is no such line, installing a boiler for this oven alone makes no sense; the electric model is the better choice.

Can I heat IBC tanks as well?

Yes. The models for 4 drums and above take the same volume in IBC tanks: 4 drums 1 IBC, 8 drums 2 IBC, 12 drums 3 IBC, 16 drums 4 IBC, 24 drums 6 IBC.

Is a capacity larger than 24 drums possible?

Our standard production goes up to 24 drums. Larger capacities — 32, 64 drums and above — are designed and built as hotboxes, in the form of a controlled climate room that a forklift can drive into. They are priced after a survey.

How long does the oven take to heat up?

The time varies with the type of raw material, the starting and target temperatures and the number of full drums. A typical melting cycle is a few hours. If you tell us your raw material and target temperature, we will calculate an estimated cycle time and send it with the quotation.