ISITMAX
Thermostate & Steuerungen
Eberle DIN-Rail Thermostats and Control Sets
Eberle DIN-rail thermostats are control units that manage snow and ice melting and frost protection heating automatically.
ab €990 $1 145Produkt ansehen →
Thermostate & Steuerungen
Floor Heating Cable Fixing Strip
The floor heating cable fixing strip is a galvanised steel fixing strip with teeth at 2.5 cm intervals.
Richtpreis · ab
€40 / $45
Richtpreis ab Werk Istanbul, zzgl. MwSt., Fracht und Zoll. Umgerechnet vom TRY-Listenpreis zum angegebenen Kurs; verbindlich erst im Angebot.
Kurs vom: 2026-09-15
Überblick
The floor heating cable fixing strip is a galvanised steel fixing strip with teeth at 2.5 cm intervals, used to fasten floor heating cable to the floor at even spacing and under light tension. The strip is screwed or glued to the floor, the cable is pressed between the teeth, and it stays at the same spacing throughout the laying. It is sold in a 20 metre roll; one roll covers roughly 5 m² of heated area. If the spacing is disturbed, the cables come closer together, hot and cold bands form in the floor and the system may fail later.
Auf einen Blick
2.5 cm tooth pitchIt sets the cable spacing in 2.5 cm steps, so you hit the W/m² figure in the project.
20 m roll — roughly 5 m²One roll covers roughly 5 m² of heated area.
Galvanised steel strip1 cm wide, 1.5 mm thick, 400 g per roll.
CE-certified manufacture, 2-year warrantyOur own manufacture since 1995. Technical support Monday–Saturday, 09:00–17:00.
Technische Daten
| Property | Value |
|---|---|
| Product type | Toothed galvanised steel fixing strip |
| Tooth spacing | 2,5 cmthe cable spacing is set in these steps |
| Strip width | 1 cm |
| Strip thickness | 1,5 mm |
| Unit of sale | 20 metre roll |
| Roll weight | 400 gr |
| Area covered by one roll | Roughly 5 m² |
| Strip per square metre | Roughly 4 mcorresponds to roughly 25 cm between strips |
| Fixing to the ground | By screwing or gluing |
| Cutting | Tin snips or an angle grinder |
| Where it is used | Indoors, free cable laying beneath screed |
| Conformity | CE-certified manufacture |
| Warranty | 2-year manufacturer warranty |
| Barcode | 8683498836621 |
Auswahlhilfe
How many rolls are needed? Length calculation
| Area to be heated | Strip required | Number of rolls |
|---|---|---|
| 5 m²small bathroom | roughly 20 m | 1 roll |
| 10 m²kitchen | roughly 40 m | 2 rolls |
| 20 m²room | roughly 80 m | 4 rolls |
| 40 m²living room | roughly 160 m | 8 rolls |
Ist dies das richtige Produkt?
Passend, wenn
- You will lay floor heating cable as a free roll beneath screed.
- You want to set the cable spacing yourself and hit the W/m² figure in the project.
- You are working in wide, regular areas such as a living room, hallway or open-plan kitchen.
- Your room plan is irregular and the ready-made mat size does not fit.
Nicht geeignet, wenn
- If you are going to use a floor heating mat — on a mat the cable already comes stitched onto a ready mesh at fixed spacing; you simply unroll the mat and lay it, so buying strip is an unnecessary expense.
- If you are laying a small bathroom of a few square metres — fibreglass fixing tape is cheaper and easier to work with in a confined space.
- If you are wrapping cable around a pipe — this strip is for floors; on a pipeline, heat tracing cable wrapped around the pipe body is used.
- If what you are looking for is insulation beneath the floor — the strip does not reduce heat loss; for that there is technical thermal and acoustic insulation underlay laid beneath the screed.
- If you can neither drive screws into the floor nor apply adhesive — a strip that cannot be fixed down is of no use.
Installation
Yes, you can lay it yourself — laying the strip requires no electrical knowledge and is done with hand tools; the electrical connection of the cable is made by a qualified person.
Warning: While the screed is being poured, take care that the rows of cable do not come closer together or cross one another; cable that overlaps overheats at that point.
Bestellung und Lieferung
- same dayYou decide the number of rolls and place the order
- 1 working dayStock check and packing
- 1 working dayHandover to the carrier and tracking number
- 1–3 working daysDelivery throughout Türkiye
Häufige Fragen
How many square metres does one roll cover, and how many rolls should I buy?
A 20 metre roll covers roughly 5 m² of heated area; that works out at roughly 4 metres of strip per square metre. Divide the area by 5 and round up: 4 rolls for 18 m², 8 rolls for 40 m². On a plan with many turns, buying one extra roll to allow for cutting makes the work easier.
What material is the floor heating cable fixing strip made of?
Galvanised steel strip: 1 cm wide, 1.5 mm thick, 400 g per roll. Because it stays inside the screed, a galvanised coating is preferred; the strip is cut with tin snips or an angle grinder.
How does it change the cable spacing, and how can I hit the W/m² figure?
The teeth are 2.5 cm apart; by clipping the cable into the tooth that suits your plan, you tighten or widen the spacing in 2.5 cm steps. When you change the value given as the C-C spacing in the installation manual, the wattage per square metre changes too; stick to the spacing stated in the project.
Is this strip needed with a floor heating mat as well?
No, it is not needed. On a mat the cable already comes stitched onto a ready mesh at fixed spacing at the factory; you simply unroll the mat and lay it. The fixing strip is only for installations where the cable is unwound from a roll and laid free — if you are buying mat, do not add this product to your basket.
I cannot drive screws into the floor — can I still use it?
Yes, the strips can also be fixed with adhesive. First the surface must be dry and free from dust, mortar residue and grease. The test is this: the strip must hold firmly enough not to shift while the screed is being poured. If there is an insulation layer on the floor, gluing is preferred.
Ähnliche Produkte
Thermostate & Steuerungen
Eberle Temperature and Moisture Sensors
The Eberle temperature and moisture sensor is the component that decides when a snow melting or de-icing system runs.
ab €100 $115Produkt ansehen →
Thermostate & Steuerungen
Heat Trace Junction Box
A heat trace junction box is the point, exposed to outdoor conditions, where the heating cable is connected to the supply.
ab €30 $35Produkt ansehen →
Thermostate & Steuerungen
Heating Cable Splice and Termination Kit
Self-regulating heating cables are cut to length on site.
ab €10 $10Produkt ansehen →
Angebot anfordern
Beschreiben Sie die Anwendung — wir legen das System aus und erstellen ein Angebot.