ISITMAX
Fußbodenheizung
Balcony, Terrace and Conservatory Floor Heating
Balcony, terrace and conservatory floor heating is a floor heating system that warms open or glazed floors with a 200 W/m² electri
ab €245 $285Produkt ansehen →
Fußbodenheizung
Under-Parquet Floor Heating Carbon Heating Film
Under-parquet floor heating carbon heating film is an electric heating element with a power density of 200 W/m² and a thickness of under 1 mm.
Richtpreis · ab
€215 / $250
Richtpreis ab Werk Istanbul, zzgl. MwSt., Fracht und Zoll. Umgerechnet vom TRY-Listenpreis zum angegebenen Kurs; verbindlich erst im Angebot.
Kurs vom: 2026-09-15
Verfügbare Größen
- 2m2
- 3m2
- 4m2
- 5m2
- 6m2
- 7m2
- 8m2
- 9m2
- 10m2
- 11m2
- 12m2
- 13m2
- 14m2
- 15m2
- 16m2
- 17m2
- 18m2
- 19m2
- 20m2
- 21m2
- 22m2
- 23m2
- 24m2
Überblick
Under-parquet floor heating carbon heating film is an electric heating element with a power density of 200 W/m² and a thickness of under 1 mm, laid beneath laminate parquet and vinyl floor coverings without any screed. ISITMAX FilmMax carbon films are made by placing thin carbon strips between two layers of polymer film; they arrive cut to the dimensions of your room, with all electrical connections made and tested at the factory. The floor temperature is held between 22 and 25 °C by the digital thermostat included in the package, so the problem of stepping onto a cold floor disappears. It is the most practical way of achieving under-parquet floor heating in renovation projects where screed is not possible and in rooms covered with laminate parquet; the product is prepared between 2 and 24 m², in steps of one square metre.
The carbon heating film used for under-parquet floor heating is a flat, flexible heating element made by placing thin carbon strips between two layers of polymer film. When power is applied, the carbon strips heat up and spread the heat upwards from a wide surface — that is, towards the floor covering. What sets it apart from the other members of the electric heating family is its shape: because the heater is a sheet rather than a strand, the heat does not come from points but from the whole surface.
Auf einen Blick
200 W/m² carbon heating filmLaid beneath laminate parquet and vinyl without screed; the floor is held in the 22–25 °C band.
2 – 24 m², in steps of one square metreThe film is cut to your dimensions, its connections are made at the factory, and it is tested before dispatch.
Under 1 mm thickIt creates no change in level; the gap under the door and the threshold height stay the same, and there is no waiting for screed.
2-year operating warrantyThe thermostat, floor sensor and reflective insulation are included in the package price.
Einsatzbereiche
FilmMax carbon heating film
No screed, thin, fast
Laid directly beneath the parquet, it stays under 1 mm and creates no change in level. It delivers 200 W/m² and is prepared in 50 / 80 / 100 cm widths. It is the only practical solution in renovation and in areas where screed cannot be laid. The operating warranty is 2 years.
TMax cable / EasyMat mat
Beneath screed, with any covering
Laid beneath a minimum of 3 cm of screed; ideal for ceramic, marble and natural stone. It is prepared in 150 / 180 / 200 / 240 W/m² steps according to the space. Because it works protected inside the screed, a 20-year SafeMax warranty is given on the heating element.
Technische Daten
| Property | Value |
|---|---|
| Product type, code, area range | Under-parquet carbon heating film, no screed, HomeMax · ISX-PARKE-KARBON-FILM · 2 – 24 m², in steps of one square metre |
| Heater and power | FilmMax carbon heating film · 200 W/m²thin carbon strips between two layers of polymer film |
| Thickness and width | Total thickness under 1 mm · widths of 50, 80 and 100 cmthe width is determined by ISITMAX according to the room dimensions |
| Floor temperature and warm-up | Target 22 – 25 °C · first warm-up 10 – 15 minuteswith no screed, it is faster than systems laid beneath screed |
| Compatible coverings | Laminate parquet (floating / click), vinyl flooring, LVTceramic, marble, natural stone, carpet and solid parquet are not suitable |
| Laying rules | a 5 – 10 cm gap from the wall edges · no heating under furniture that sits flush with the floor · no nails or screws driven into it |
| Thermostat and zoning | Digital, surface-mounted, with floor sensor, weekly programming · 1 unit up to 12 m², 2 units up to 24 m²the WiFi model is optional and the difference is calculated separately |
| Protection and warranty | 30 mA residual current device (RCD) mandatory · 2-year operating warranty (SafeMax) |
| Preparation and delivery | Cut to measure, connected and tested at the factory · prepared in 1 working day and shipped ready to install |
Auswahlhilfe
How is the heated area for under-parquet floor heating calculated?
| Floor zone | Heated? | Reason |
|---|---|---|
| Wardrobe, bookcase and a cupboard sitting flush with the floor | No | Closed base, no air circulation, heat is trapped |
| Under fitted cupboards and white goods | No | The carcass covers the floor and a thermal bridge forms |
| In front of the fireplace | No | Already a heat source; left outside the area |
| Room entrance and seating area | Yes | Open floor; the longest part of the day is spent here |
| Around the bed and in front of the desk | Yes | Feet rest on the floor and the walking route is heated |
| Under furniture and bed frames on legs | Yes | The air gap prevents heat from building up |
Ist dies das richtige Produkt?
Passend, wenn
- Your floor will be laid with laminate parquet, vinyl or LVT and the covering will go down as a floating (click / interlocking) system.
- You have no way of laying screed, or you are renovating without disturbing the existing floor; because the film stays under 1 mm, it does not change the gap under the door or the threshold level.
- You would rather not deal with cutting and wiring — the films arrive cut to your dimensions, connected and tested.
- You want a system that warms quickly: with no screed, the temperature is felt at the floor surface within 10–15 minutes.
- With the areas under furniture deducted, your heated area comes out between 2 and 24 m².
Nicht geeignet, wenn
- If your covering is ceramic, tile, marble or natural stone — carbon film is not laid beneath these coverings. The TMax cable or EasyMat mat system, which goes beneath screed, is used instead.
- If you are heating a wet room — a bathroom calls for one step higher: bathroom floor heating is dimensioned at 180 W/m² beneath ceramic.
- If you can lay screed in the kitchen, a room or the living room — kitchen floor heating and room and living room floor heating are at the 150 W/m² step and carry a 20-year warranty on the heating element.
- If carpet, fitted carpet or solid parquet fixed with nails and screws will go on the floor — a woven layer is a thermal resistance, and no nails or screws may be driven into the film.
- If a long warranty or unconditional returns are a requirement — FilmMax carries a 2-year operating warranty and, because it is cut to measure, is not covered by the 30-day unconditional return; in systems laid beneath screed the heating element is guaranteed for 20 years.
Installation
- PreparationThe floor is cleaned and levelled; it must be dry and even. The reflective insulation mat included in the package is laid on the floor. This mat directs the heat upwards and saves energy. At the same step, the areas that will not be heated — wardrobe, bookcase, fitted cupboard, the area in front of the fireplace — are marked out, and the film is started 5–10 cm in from the wall edges.
- Laying the filmThe carbon film is laid over the insulation and fixed with tape. Because the films arrive cut to size with their connections already made, you do not need to carry out any cutting or wiring. The floor sensor is placed on top of the film, at a point representative of the temperature.
- Electrical connection and parquetThe thermostat and floor sensor must be connected by a qualified electrician. The laminate parquet or vinyl flooring then goes straight down on top; there is no waiting period and no screed to dry.
Three critical rules. One: no nails or screws may be driven into the carbon films. Two: the parquet must be laid as a floating system (click / interlocking). Three: the system must always be run under the protection of a 30 mA residual current device (RCD).
Bestellung und Lieferung
- same dayYou place your order by selecting your heated area
- 1 working dayOur customer representative takes your dimensions and the area and width are confirmed
- 1 working dayThe film is cut to size, connected and tested
- shipping timeShipment carriage-forward with Sürat Kargo, at a discounted rate using the ISITMAX shipping code
- as requiredTechnical support with laying and setting the thermostat
Garantie und Support
To learn about our completed projects and our customers' experiences, you can visit our references page. Under-parquet floor heating carbon heating film is part of the ISITMAX HomeMax floor heating family.
Häufige Fragen
How much electricity does carbon film use?
In a 10 m² room with 200 W/m² carbon film the total power is 2,000 W. Running an average of 6 hours a day, monthly consumption comes to roughly 360 kWh. To find the monthly cost, multiply this figure by the unit price on your bill. With thermostat scheduling, actual consumption stays below this figure.
Should I choose carbon film or a cable or mat system?
If your floor covering is laminate parquet or vinyl and you have no way of laying screed, FilmMax carbon film is the right choice. If your covering is ceramic, marble or natural stone, or if you can lay screed, the longer-lasting TMax cable or EasyMat mat system is recommended.
Do I need to cut the product or make its connections myself?
No. ISITMAX cuts every carbon film to your dimensions, makes the electrical connections at the factory and tests them before dispatch. All you need to do is lay the film on the floor and fix it with tape. This is critical to the product working properly and lasting.
Can I use it over a ceramic floor?
No, carbon film is not laid beneath ceramic. For a ceramic covering, the TMax cable or EasyMat mat system laid beneath screed must be used. FilmMax is compatible only with laminate parquet and vinyl floor coverings.
Is carbon film safe?
Yes. FilmMax carbon films are made between two layers of polymer insulation. The system must always be run under the protection of a residual current device (30 mA RCD). No nails or screws may be driven into it — the parquet must be a floating system (click / interlocking).
Ähnliche Produkte
Fußbodenheizung
Bathroom Floor Heating
Bathroom floor heating warms a ceramic or tiled bathroom floor with a 180 W/m² electric heater embedded in the screed.
ab €235 $270Produkt ansehen →
Fußbodenheizung
Fibreglass Fixing Tape
Fibreglass fixing tape is a high-temperature consumable that holds a heating cable at even spacing and stops it moving on the surf
ab €5 $10Produkt ansehen →
Fußbodenheizung
Hammam Floor Heating
Hammam floor heating warms the walking area, seating area, backrest area and navel stone of a hammam with a 240 W/m² electric heat
ab €270 $310Produkt ansehen →
Angebot anfordern
Beschreiben Sie die Anwendung — wir legen das System aus und erstellen ein Angebot.